140
39. PEGASUS GT65 FRONT BED
MAKE UP
Step 1: Pull out the slats from the offside
towards the bunks on the other side of the
vehicle.
Step 2: There will be a slight gap between the
two bunk faces.
Step 3: Turn the cushions over and move the
back rests into the middle.
Step 4: Move the seat base cushions so that
the knee roll is against the outside wall of the
caravan.
40. RETRACTABLE BED
ASSEMBLY
This is only applicable on some models.
Step 1: To raise the bed, lift the section of the
mattress nearest to the headboard and flip it
forward. Then push the frame backwards to
shorten the bed length. Flip the mattress up
to create a relaxed seating position.
Step 2: To lower the bed, flip the mattress
forward again and then pull the bottom of
the bed frame towards you until the bed is
completely flat. Push the mattress over to
make a flat sleeping area.