21. Exterior Features; Grp; Rooflights; Heki Rooflights - Bailey Pursuit Owner's Manual

21. EXTERIOR FEATURES

GRP

GRP components need to be washed, waxed
and cared for like a car. Chemicals and dirt can
collect during storage, and the outer surface
called a gel coat can be stained or marked
when chemicals combine with rain or dew.
Most stains or marks can be removed with mild
dish-washing detergent, but more stubborn
marks may require a rubbing compound. To
help keep your GRP components looking
almost like new, it is wise to wash the parts
monthly (or more frequently) using mild dish-
washing detergent, but avoid using strong
alkaline (e.g. tri-sodium phosphate) or acidic
cleaners or abrasives. Waxing the components
once or twice a year with a good grade paste
wax will help to maintain the colour and finish.

ROOFLIGHTS

HEKI Rooflights

Operating, Safety and Care Instructions
HEKI
1. Opening in the tilt setting
a) Press the locking buttons at both catches
on the glass and turn inwards through approx.
90°.
b) Grasp the bar in the middle, unclasp from
the anchoring fasteners, swivel the bar down
and push the glass dome upwards. (Glass
dome is assisted after approx. 150mm by the
two pneumatic springs.)
c) Swivel the bar towards the glass dome and
clip into position.
To close the HEKI, perform steps (a–c) in
reverse order.
2. Opening in the intermediate setting
a) Open both catches on the glass.
b) Grasp the bar in the middle, unclasp from
the anchoring fasteners, swivel down and push
the glass dome upwards. (Glass dome opens
automatically after approx. 150mm through
the two pneumatic springs.)
c) Open both fasteners, and swivel the bar
towards the intermediate setting and pull the
glass dome down until the bar rests in the
hold.
d) Secure the bar with the two fasteners.
To close HEKI, perform steps (a–d) in reverse
order.
3. Opening in permanent ventilation setting
a) Open both catches on the glass.
b) Push glass dome up approx. 2cm with both
hands on the two catches and turn the catches
to fix them in the ventilation setting.
To close HEKI, perform steps (a–b) in reverse
order.
4. Closing the blind
a) To close the blind, grasp the end rod (without
grip) in the recess and engage in the opposite
end rod (with grip).
Caution! When the sun is shining brightly,
the blind may only be closed 2/3 and the
glass dome must be fixed in the "permanent
ventilation setting".
b) You can move both joined end rods to adjust
the blind to the required position (black out/
91