86
Enter end time point
• Use the control knob/push button to set
the hours, then the minutes.
If the start time has passed when
i
entered, the operating parameters are
only taken into consideration when
the next start/end times are reached.
Until then, the operating parameters
set outside the timer remain valid.
Set the room temperature
• Click to change to the setting level.
• Use the control knob/push button to select
the required room temperature.
• Click the control knob/push button to
confirm the value.
Set the warm water level
• Click to change to the setting level.
• Use the control knob/push button to select
the required warm water level.
• Click the control knob/push button to
confirm the value.
Select power type
• Click to change to the setting level.
• Use the control knob/push button to select
the power type.
• Click the control knob/push button to
confirm the value.
Select fan level
• Click to change to the setting level.
• Use the control knob/push button to select
the required fan level.
• Click the control knob/push button to
confirm the value.
Activate the timer (ON)
• Click to change to the setting level.
• Use the control knob/push button to
activate the timer (ON).
• Click the control knob/push button to
confirm the value.