Once the water temperature is reached, the
room is heated again.
* This symbol will flash until the required
water temperature is reached.
Select power type
• Use the control knob/push button to select
the symbol in menu line (3).
• Click to change to the setting level.
• Use the control knob/push button to select
the required power type.
Click the control knob/push button to confirm
the value.
Symbol Operating mode
a
Gas/Diesel
b
EL 1
b + c
EL 2
a + b
Mix 1 *
Gas/Diesel+ Electro
a + b + c Mix 2 * Gas/Diesel+ Electro
* Mixed mode
Special aspects in the mixed mode
Interruption of the power supply 230v
Combi
Gas:
The heater automatically
switches to the gas mode. As soon as the
230v power supply is connected, the heater
automatically switches back to the mixed
mode.
Malfunction in the combustion process (e.g.
lack of fuel)
Combi
Gas
The heater automatically
switches
to the electro mode. If the heater should
operate in the mixed mode again, the cause of
the malfunction needs to be rectified. Switch
the heater off and on again on the control
panel.
Select fan level
When the heater/air conditioning unit is
concerned.
• Use the control knob/push button to select
• Click to change to the setting level.
• Use the control knob/push button to select
• Click the control knob/push button to
Heater Combi
Symbol
–
a
Power type
Gas/Diesel
Electro
Electro
b
c
d
Set timer
• Use the control knob/push button to select
• Click to change to the setting level.
If the timer is activated (ON), the timer in the
menu is shown as deactivated (OFF).
Enter start time
• Use the control knob/push button to set
the symbol in menu line (3).
the required fan level.
confirm the value.
Operating
Description
Mode
Off
Fan is switched off
Vent
Circulating air: if no
device is in operation
9 speed levels can
be selected
Eco
Low fan level
Mild
High fan level
High
Fast heating of the
room. Available,
if the difference
between selected
and current room
temperature is >10
the symbol in Menu line (4)
the hours, then the minutes.
85
C
o