Bailey Pursuit Owner's Manual page 120

108
29. THETFORD C262 TOILET
The Thetford Cassette Toilet is a high quality
product. The toilet forms an integral part
of your caravan bathroom, thanks to its
functional design which combines modern
styling and ease of use.
The C262 Cassette Toilet is manufactured
from high quality synthetic materials which
makes it a durable, user and maintenance
friendly toilet.
The toilet is made up of two parts: a
permanently fixed part and a waste holding
tank that is accessible from the outside. The
removable waste holding tank is located under
the toilet bowl and can be removed via a door
on the outside of the caravan. The Thetford
Cassette Toilet is the solution to the sanitary
problem in your caravan.
These operating instructions cover Thetford
Cassette Toilet C262 CWE.
Parts
1. Cover
2. Seat
3. Swivelling toilet bowl
4. Blade handle to open and close blade
5. Control panel
5a. Electric flush button
5b. Waste holding tank level indicator
6. Pull handle
7. Pour out spout
8. Cap with measuring cup
9. Automatic pressure release vent
10. Vent button
11. Sliding cover
12. Blade opener
13. Waste holding tank mechanism
14. Wheel
15. Service door
16. Water fill door
17. Console with flush-water tank
18. Filter for electric ventilator
19. Location waste pump-out system
Preparing for use (standard)
• Open the access door on the outside of
your caravan.
• Remove the waste holding tank by pulling
the safety catch (which holds the tank in
place) upwards.
• Pull the waste holding tank outward to the
stop. Tip it slightly and take the tank fully
out.
• Place the tank upright and turn the rotating
emptying spout upwards. The emptying
spout ensures that the tank can be easily
and hygienically emptied.
• Remove the cap, with the measuring cup
inside, from the emptying spout and pour
the correct dosage of Thetford toilet fluid
(see product label) into the holding tank.
This avoids unpleasant smells and keeps
the inside of the tank clean. Next add
approximately 2 litres of water–enough
to ensure that the bottom of the waste
holding tank is covered. Screw the cap
back onto the emptying spout and turn
back to its original position. The emptying
spout measuring cup is supplied inside the
toilet and needs to be fitted to the pour out
spout before first use of the toilet. Never
add toilet fluid directly via the blade or the
toilet bowl as this could damage the lip seal
of the waste holding tank. Always pour the
fluids via the emptying spout. The lip seal
is the water tight seal around the top of the
tank.
• Slide the waste holding tank back into its
original position via the access door. Make
sure that it is secured with the safety
catch. Close the access door and lock it.
Your Thetford toilet is now ready to use.
• Never use force if you cannot get the tank
back into place easily. This may cause
serious damage. If blockage occurs, always
check that the blade handle is in the
correct position.
• For toilets with own flush-water tank: open
the water filling door and fill the flush-
water tank with the correct dosage of