The Pegasus Gt65 Control Panel; Ivan Panel Operating Instructions; Operating The Space Heater - Bailey Pursuit Owner's Manual

50
THE PEGASUS GT65 CONTROL
PANEL

iVan Panel Operating Instructions

FIG. 1: Home Screen
FIG. 2: Home Screen Functions

Operating the Space Heater

1. From the home screen, touch the "van" icon
2. The following screen will appear:
FIG. 3: Space Heater Functions
3. Select the desired heat setting by tapping
one of the following icons; the icon will turn
red to show it has been activated.
Note: The heater will not operate if the desired
temperature is below the current room
temperature.
*Night Time Setting: For quiet night time
operation and to reduce energy consumption.
Select 500W and a lower temperature.
**Maximum Heat Setting: This uses gas
and electric simultaneously for higher heat
outputs. It intelligently balances between gas
and electric settings, varying the heat output
accordingly to maintain the selected room
temperature.
***Frost Protection Setting: This uses a
small amount of power to maintain a very low
temperature in the van, reducing the chance
of frost damage occurring. Please see page 54
for winterising guide.
4. Select the desired room temperature
(ranges from 18°C to 35°C) using the + and —
buttons.
5. Once the desired heat setting has been
activated, press the home button to return to
the home screen.
The home screen will now show the 'van' icon
in red with the selected heat setting displayed.