Gas Operation; Explanation Of Operating Controls - Bailey Pursuit Owner's Manual

124
switch on the refrigerator and any other
gas appliances (e.g. stove) for a short time.
The gas ignites without delay.
• Each refrigerator with manual ignition is
equipped with an automatic flame safety
valve which interrupts the gas supply
automatically after approx. 30 seconds
when the flame has extinguished.
As a basic rule, gas operation is
!
prohibited in petrol stations!
Prior to Starting the Refrigerator in Gas
Mode:
• Open the gas cylinder valve.
• Open the shut-off valve for gas supply to
the refrigerator.

Explanation of Operating Controls

Electrical Operation
Switch on the appliance by turning the energy
selection switch (1) clockwise to position:
230v operation
12v operation

Gas Operation

1. Turn the rotary selector switch (1) to
position
2. Turn the temperature selector (2) clockwise
and push. Keep the controller button
depressed.
3. Then, press knob (3) of battery igniter down
and keep it depressed. The ignition process
is activated automatically.
4. Once the flame ignites, the pointer of
galvanometer (4) begins moving into the
green range. The refrigerator is operational.
Keep knob (2) depressed for approx. 15
seconds and finally release it.
Setting of Cooling Compartment Temperature
Note: The temperature levels do not relate to
absolute temperature values.
Select the desired
cooling compartment
temperature by
turning the rotary
knob (2).
The scale starts
with MIN position
(small bar = highest
temperature) and
climbs up to MAX
position (large bar =
lowest temperature).