Side Dinette Bottom Bunk Assembly; 42. Retractable Bed Assembly - Bailey Unicorn Owner's Manual

41. SIDE DINETTE BOTTOM BUNK ASSEMBLY.

Side Dinette Bottom Bunk Assembly
i. Remove table from support leg.
i. Remove table from support leg.
ii. Place the table top between the seats on ledge.
iii. Arrange seat cushions as appropriate
ii. Place the table top between
seats on ledge.
When children, especially those under 3 years
!
iii. Arrange seat cushions as
of age, use any bunk/bed care must be taken
against the risk of them falling out.
appropriate.
When Children, especially those
under 3 years of age, use any
bunk/bed care must be taken
against the risk of them falling out.

42. RETRACTABLE BED ASSEMBLY.

STEP 1: To raise the bed lift the section of the mattress
nearest to the headboard and flip it forward. Then push
the frame backwards to shorten the bed length. Flip the
mattress up to create a relaxed seating position.
87
STEP 2: To lower the bed flip the mattress forward again
and then pull the bottom of the bed frame towards you
until the bed is completely flat. Push the mattress over
to make a flat sleeping area.