Table of Contents
Advertisement
5.10 Saving setup information
When power is removed from the NextMove PCI all data, including configuration and tuning
parameters, is lost. You should therefore save this information in a file, which can be loaded
when the card is next used. Alternatively, the information can be included in program files as
part of the Startup block.
1. In the Toolbox, click the Edit & Debug icon.
2. On the main menu, choose File, New File.
A new program editing window will appear.
3. On the main menu, choose Tools,
Upload Configuration Parameters.
WorkBench v5 will read all the
configuration information from the
NextMove PCI and place it in a Startup
block. For details of the Startup block,
see the MintMT help file.
5-30 Operation
MN1903
Advertisement
Table of Contents
