2.2 Receiving and inspection
When you receive your NextMove PCI, there are several things you should do immediately:
1. Check the condition of the packaging and report any damage immediately to the carrier
that delivered your NextMove PCI.
2. Remove the NextMove PCI from the shipping container but do not remove its anti-static bag
until you are ready to install it. The packing materials may be retained for future shipment.
3. Verify that the catalog number of the NextMove PCI you received is the same as the
catalog number listed on your purchase order. The catalog/part number is described in
the next section.
4. Inspect the NextMove PCI for external damage during shipment and report any damage to
the carrier that delivered it.
5. If the NextMove PCI is to be stored for several weeks before use, be sure that it is stored
in a location that conforms to the storage humidity and temperature specifications shown
in section 3.2.
2.2.1 Identifying the catalog number
NextMove PCI cards are available with different specifications. As a reminder of which card
has been installed, it is a good idea to write the catalog number in the space provided below.
Catalog number:
Installed in:
A description of the catalog numbers are shown in the following table:
Catalog
number
PCI001-501
PCI001-502
PCI001-503
PCI001-504
PCI001-505
PCI001-510
PCI001-511
PCI001-512
PCI001-508
PCI001-513
MN1903
PCI001-_______
________________________
Description
NMPCI main card with PNP digital outputs, 1 axis
NMPCI main card with PNP digital outputs, 2 axes
NMPCI main card with PNP digital outputs, 3 axes
NMPCI main card with PNP digital outputs, 4 axes
NMPCI main card with PNP digital outputs, 8 axes
NMPCI main card with NPN digital outputs, 1 axis
NMPCI main card with NPN digital outputs, 2 axes
NMPCI main card with NPN digital outputs, 3 axes
NMPCI main card with NPN digital outputs, 4 axes
NMPCI main card with NPN digital outputs, 8 axes
______
Date:
Introduction 2-3