Table of Contents
Advertisement
4. Now drag the IN1 icon
This will setup IN1 as the Forward Limit input of axis 0.
5. Click Apply to send the changes to the NextMove PCI.
Note: If required, multiple inputs can be configured before clicking Apply.
5.9.2 Digital output configuration
The Digital Outputs tab allows you to define how each digital output will operate and if it is to
be allocated to a drive enable output (see section 5.3.4). Remember to click Apply to send the
changes to the NextMove PCI.
MN1903
onto the Fwd Limit icon
.
Operation 5-29
Advertisement
Table of Contents
