Table of Contents
Advertisement
Included with NextMove PCI is the Baldor Motion Toolkit CD. This contains a number of
utilities and useful resources to get the most from you MintMT controller. These include:
Mint WorkBench v5
H
This is the user interface for communicating with the NextMove PCI. Installing Mint
WorkBench will also install firmware for NextMove PCI.
PC Developer Libraries
H
These include ActiveX interfaces that allow PC applications to be written that
communicate with the NextMove PCI.
Embedded Developer Libraries
H
Allows embedded C31 applications to be developed using the Texas Instruments
TMS320C3x compiler.
This manual is intended to guide you through the installation of NextMove PCI.
The chapters should be read in sequence.
The Basic Installation section describes the mechanical installation of the NextMove PCI.
The following sections require knowledge of the low level input/output requirements of the
installation and an understanding of computer software installation. If you are not qualified in
these areas you should seek assistance before proceeding.
2-2 Introduction
MN1903
Advertisement
Table of Contents
