Table of Contents
Advertisement
5.1 Introduction
The software provided includes a number of applications and utilities to allow you to configure,
tune and program the NextMove PCI. If you do not have experience of software installation or
Windows applications you will need to seek further assistance for this stage of the installation.
The CDROM containing the software can be found inside the rear cover of this manual or
separately within the packaging.
5.1.1 Installing the driver software - Windows 95, 98 and ME
1. Turn on the PC. During the start process, Windows will detect the newly installed
NextMove PCI card.
2. When the Update Device Driver wizard is displayed, place the Baldor Motion Toolkit CD
into the CDROM drive.
3. Click Next and then locate the folder containing the device driver for NextMove PCI.
This is on the CD in the folder:
Drivers\nmPCI\win9x
Follow the instructions on screen to load the device driver. Once the device driver has been
installed from the CD, Windows will continue starting as normal.
MN1903
Operation
5
Operation 5-1
5
Advertisement
Table of Contents
