Table of Contents
Advertisement
5.5.3 Overdamped response
If the graph shows that the response is overdamped (it reaches the demand too slowly, as
shown in Figure 13) then the value for KDERIV should be decreased to reduce the damping of
the move. If the overdamping is excessive, it may be necessary to increase the value of
KPROP.
Demand
position
10. Click in the KDERIV and/or KPROP boxes
and make the required changes. The ideal
response is shown in section 5.5.4.
MN1903
Measured position
Figure 13 - Overdamped response
Operation 5-19
Advertisement
Table of Contents
