Cisco Unified Communications Manager Phone Setup; Determine Phone Mac Address; Set Up Cisco Ip Phone - Cisco 7821 Administration Manual

Cisco Unified Communications Manager Phone
Setup
•
•
•
•
•
•
•

Determine Phone MAC Address

To add phones to the Cisco Unified Communications Manager, you must determine the MAC address of a
Cisco IP Phone.
Procedure
Perform one of the following actions:
• On the phone, press Applications > Phone Information, and look at the MAC Address field.
• Look at the MAC label on the back of the phone.
• Display the web page for the phone and click Device Information.

Set Up Cisco IP Phone

If autoregistration is not enabled and the phone does not exist in the Cisco Unified Communications Manager
database, you must configure the Cisco IP Phone in Cisco Unified Communications Manager Administration
manually. Some tasks in this procedure are optional, depending on your system and user needs.
Determine Phone MAC Address, page 45
Set Up Cisco IP Phone, page 45
Phone Addition Methods, page 50
Add Users to Cisco Unified Communications Manager, page 51
Add User to End User Group, page 53
Associate Phones with Users , page 54
Surviveable Remote Site Telephony, page 54
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
4
C H A P T E R
45