Set Up Access To Self Care Portal; Customize Self Care Portal Display - Cisco 7821 Administration Manual

Set Up Access to Self Care Portal

Set Up Access to Self Care Portal
Use this procedure to enable a user to access the Self Care Portal.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select User Management > End User.
Step 2 Search for the user and click the user ID link.
Step 3
Ensure that the user has a password and PIN configured.
Step 4 Select Save.

Customize Self Care Portal Display

Most options display on the Self Care Portal. However, you must set the following options by using Enterprise
Parameters Configuration settings in Cisco Unified Communications Manager Administration:
• Show Ring Settings
• Show Line Label Settings
Note The settings apply to all Self Care Portal pages at your site.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select System > Enterprise Parameters.
Step 2 In the Self Care Portal area, set the Self Care Portal Default Server field.
Step 3
Enable or disable the parameters that the users can access in the portal.
Step 4 Select Save.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
58