Cisco 7821 Administration Manual page 123

Feature
Services URL button
Serviceability for SIP Endpoints
Show Calling ID and Calling
Number
Show Duration for Call History
Speed Dial
SSH Access
Description and more information
Allows users to access services from a programmable button rather than by using the Services
menu on a phone.
See:
• Cisco Unified Communications Manager Administration Guide, "Cisco Unified IP Phone
Configuration" chapter
• Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone
Services" chapter
Enables administrators to quickly and easily gather debug information from phones.
This feature uses SSH to remotely access each IP phone. SSH must be enabled on each phone
for this feature to function.
For more information, see
Manager, on page 193.
The phones can display both the calling ID and calling number for incoming calls. The IP
phone LCD display size limits the length of the calling ID and the calling number that display.
The Show Calling ID and Calling Number feature applies to the incoming call alert only and
does not change the function of the Call Forward and Hunt Group features.
See "Caller ID" in this table.
Displays the time duration of placed and received calls in the Call History details.
If the duration is greater than or equal to one hour, the time is displayed in the Hour, Minute,
Second (HH:MM:SS) format.
If the duration is less than one hour, the time is displayed in the Minute, Second (MM:SS)
format.
If the duration is less than one minute, the time is displayed in the Second (SS) format.
Dials a specified number that has been previously stored.
See:
• Cisco Unified Communications Manager Administration Guide, "Cisco Unified IP Phone
Configuration"
• Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone"
Allows you to enable or disable the SSH Access setting using Cisco Unified Communications
Manager Administration. Enabling the SSH server allows the phone to accept the SSH
connections. Disabling the SSH server functionality of the phone blocks the SSH access to
the phone.
See Set Up SSH Access, on page
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Telephony Features for Cisco IP Phone
Control Debug Information from Cisco Unified Communications
122.
109