Cisco 7821 Administration Manual page 63

g) To view the details of a group, select the group and click View Details.
h) In the Extension Mobility area, check the Enable Extension Mobility Cross Cluster box if the user can use
for Extension Mobility Cross Cluster service.
i) In the Device Information area, click Device Associations.
j) Use the Search fields and Find to locate the device that you want to associate to the user.
k) Select the device, and click Save Selected/Changes.
l) Click Go next to the "Back to User" Related link in the upper right corner of the screen.
m) Select Save.
Step 12 Customize the softkey templates. Select Device > Device Settings > Softkey Template.
Use the page to add, delete, or change the order of softkey features that display on the user's phone to meet
feature usage needs.
For more information, see the "Softkey template setup" and "Cisco Unified IP Phone setup" chapters in theCisco
Unified Communications Manager Administration Guide.
Step 13 Configure speed-dial buttons and assign speed-dial numbers. Select Device > Phone.
Users can change speed-dial settings on their phones using their Self Care
Note
Portal.
a) Find the phone you want to set up.
b) In the Association Information area, click Add a new SD.
c) Set up the speed dial information.
d) Select Save.
Step 14 Configure Cisco IP Phone services and assign services. Select Device > Device Settings > Phone Services.
Provides IP Phone services to the phone.
Note Users can add or change services on their phones using the Cisco Unified Communications Self Care
Portal.
Step 15 (Optional) Assign services to programmable buttons. Select Device > Device Settings > phone button
template.
Provides access to an IP phone service or URL.
Step 16 Add user information to the global directory for Cisco Unified Communications Manager. Select User
Management > End User and configure the required fields. Required fields are indicated by an asterisk (*);
for example, User ID and last name.
Note If your company uses a Lightweight Directory Access Protocol (LDAP) directory to store information
on users, you can install and configure Cisco Unified Communications to use your existing LDAP
directory, see
LDAP Server field is enabled, you will not be able to add additional users from Cisco Unified
Communications Manager Administration.
Note If you want to add both the phone and user to the Cisco Unified Communications Manager database
at the same time, see "End user phone addition" in Cisco Unified Communications Manager
Administration Guide.
a) Set the User ID and last name fields.
b) Assign a password (for Self Care Portal).
c) Assign a PIN (for Cisco Extension Mobility and Personal Directory).
d) Associate the user with a phone.
Provides users with control over their phone such a forwarding calls or adding speed-dial numbers or
services.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Corporate Directory Setup, on page
Set Up Cisco IP Phone
141. After the Enable Synchronization from the
49