Wireless Headset; Enable Electronic Hookswitch - Cisco 7821 Administration Manual

Wireless Headset

The Cisco IP Phone 7821, 7841, and 7861 support a wireless analog headset. To use a wireless headset, users
connect a base station to the auxiliary port. The base station communicates with the wireless headset.
The Electronic Hookswitch feature enables users to remotely control basic IP phone functionality from the
wireless headset. Basic IP phone functionality includes off-hook and on-hook, ring indication, audio volume
control, and mute.

Enable Electronic Hookswitch

The Electronic Hookswitch feature supports the following headset devices:
• Jabra
◦ PRO9400 and GO6400 series and straight cable (Jabra Link14201-22)
◦ PRO920, GN9300 series and GN9120 the adapter cable Link 14201-16
For more information about wireless headsets that work in conjunction with the Electronic Hookswitch feature,
go to the following URL:
http://www.cisco.com/en/US/prod/voicesw/ucphone_headsets.html
To enable or disable the Electronic Hookswitch feature for a Cisco IP Phone 7821, 7841, and 7861, perform
these steps:
Procedure
Step 1 From the Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 Scroll to the Wireless Headset Hookswitch Control section.
Step 3 To enable Electronic Hookswitch, choose Enabled.
Step 4 To disable Electronic Hookswitch, choose Disabled.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Headsets
65