Install Cisco Ip Phone - Cisco 7821 Administration Manual

To implement TAPS, you or the end user dials a TAPS directory number and follows voice prompts. After
the process is complete, the phone contains the directory number and other settings, and the phone is updated
in Cisco Unified Communications Manager Administration with the correct MAC address.
Verify that autoregistration is enabled and is properly configured in Cisco Unified Communications Manager
Administration before you connect any Cisco IP Phone to the network. For information about enabling and
configuring autoregistration, see the Cisco Unified Communications Manager Administration Guide.
Autoregistration must be enabled in Cisco Unified Communications Manager Administration for TAPS to
function.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, click System > Cisco Unified CM.
Step 2
Select the required server and then select the Autoregister check box.
Step 3 Click Save.
Related Topics
Phone Addition Methods, on page 50

Install Cisco IP Phone

After the phone connects to the network, the phone startup process begins, and the phone registers with
Cisco Unified Communications Manager. To finish installing the phone, configure the network settings on
the phone depending on whether you enable or disable DHCP service.
If you used autoregistration, you need to update the specific configuration information for the phone such as
associating the phone with a user, changing the button table, or directory number.
Before using external devices, read
Note
Procedure
Step 1
Choose the power source for the phone:
• Power over Ethernet (PoE)
• External power supply
For more information, see
Step 2 Connect the handset to the handset port.
The wideband-capable handset is designed especially for use with a Cisco IP Phone. The handset includes a
light strip that indicates incoming calls and waiting voice messages.
Phone Power Requirements, on page
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
External Devices, on page 14.
Install Cisco IP Phone
6.
35