Wired Headsets; Connect Wired Headset; Disable Wired Headset - Cisco 7821 Administration Manual

Headsets
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 In the Find and List Phones window, enter the search criteria for the phone to which you want to add the
analog headset, then click Find.
Step 3 Click on the Device Name that you want. The Phone Configuration window displays.
Step 4 On the Product Specific Configuration Layout portion of the Phone Configuration window, ensure that the
Wideband Headset UI Control option is enabled. (This option is enabled by default.)
Step 5
In the Product Specific Configuration Layout portion of the Phone Configuration window, you can also set
the Wideband Headset option. (This option is also enabled by default).

Wired Headsets

You can use the wired headset with all of the features on the Cisco IP Phone, including the Volume and Mute
buttons. Use these buttons to adjust the earpiece volume and to mute the speech path from the headset
microphone.

Connect Wired Headset

To connect a wired headset to the Cisco IP Phone, perform these steps:
Procedure
Step 1 Plug the headset into the Headset port on the back of the phone.
Step 2 Press the Headset button on the phone to place and answer calls using the headset.

Disable Wired Headset

You can disable the headset by using Cisco Unified Communications Manager Administration. If you do so,
you also disable the speakerphone.
Procedure
Step 1 To disable the headset from Cisco Unified Communications Manager Administration, choose Device > Phone
and locate the phone that you want to modify.
Step 2
In the Phone Configuration window (Product Specific Configuration layout portion), select the Disable
Speakerphone and Headset check box.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
64