Table of Contents
Advertisement
NAME
showldapssl - show LDAP/SSL configuration and messages
SYNOPSIS
showldapssl
showldapssl cert [-v] [-i n]
showldapssl log [-M] [-C] [-S start_record_number] [-E end_record_number]
showldapssl log -f
showldapssl group administrator [-i n]
showldapssl group operator [-i n]
showldapssl group custom [-i n]
showldapssl userdomain [-i n]
showldapssl usermap
showldapssl defaultrole
showldapssl server [-i n]
showldapssl -h
DESCRIPTION
showldapssl(8) displays the LDAP/SSL configuration and diagnostic messages.
You must have useradm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
The following options are supported:
OPTIONS
-f
-h
-i n
-v
Displays diagnostic messages in real time. When this option is
used, the command does not terminate. Each diagnostic message
is displayed when it is registered. To stop the real-time display,
press Ctrl-C.
Displays usage statement. When used with other options or
operands, an error occurs.
Sets an index marker, value 1 - 5. When executed without -i, or
with -i and no value, showldapssl walks sequentially
through items 1 through 5. Exceptions: When used without -i,
the command showldapssl cert displays the certificate
information for the Primary server, and showldapssl server
displays the Primary server configuration.
Specifies verbose output. Used only with the cert operand to
display the full certificate.
showldapssl(8)
System Administration
413
Advertisement
Table of Contents
