Oracle Sun SPARC Enterprise M3000 Reference Manual page 264

setntp(8)
EXIT STATUS
SEE ALSO
250 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
Adds the two NTP servers ntp1.examples.com and ntp2.example.com.
EXAMPLE 3
setntp ntp1.example.com ntp2.example.com
XSCF>
Please reset the XSCF by rebootxscf to apply the ntp settings.
Sets the stratum value to 7.
EXAMPLE 4
setntp -c stratum -i 7
XSCF>
Please reset the XSCF by rebootxscf to apply the ntp settings.
Cancels the designation of preferred server of the NTP server.
EXAMPLE 5
setntp -m prefer=off
XSCF>
Please reset the XSCF by rebootxscf to apply the ntp settings.
Sets the clock address of the local clock of XSCF.
EXAMPLE 6
setntp -m localaddr=3
XSCF>
Please reset the XSCF by rebootxscf to apply the ntp settings.
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
rebootxscf(8), setnameserver(8), showntp(8)