Showpacketfilters - Oracle Sun SPARC Enterprise M3000 Reference Manual

NAME showpacketfilters - show the IP packet filtering rules that are set in the XSCF
network
SYNOPSIS showpacketfilters {-a | -l} [-M]
showpacketfilters -h
DESCRIPTION showpacketfilters(8) command shows the IP packet filtering rules that are set
in the XSCF network.
No privileges are required to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-a
-h
-l
-M
The setpacketfilters(8) command can be used to set the IP filtering rules.
EXTENDED
DESCRIPTION
EXAMPLES
EXAMPLE 1
EXAMPLE 2
Shows the IP packet filtering rules that are set in XSCF.
Displays usage statement. When used with other options or
operands, an error occurs.
Shows the operation status of the IP packet filtering rules that
are set in XSCF.
Displays text by page.
On M8000/M9000 servers, shows the IP packet filtering rules that are set in
the XSCF network.
showpacketfilters -a
XSCF>
-s 172.16.0.0/255.255.0.0 -i xscf#0-lan#0 -j DROP
-s 172.16.0.0/255.255.0.0 -i xscf#1-lan#0 -j DROP
-s 10.10.10.10/255.255.255.255 -j DROP
-s 192.168.100.0/255.255.255.0 -i xscf#0-lan#1 -j ACCEPT
-s 192.168.100.0/255.255.255.0 -i xscf#1-lan#1 -j ACCEPT
-i xscf#0-lan#1 -j DROP
-i xscf#1-lan#1 -j DROP
On M8000/M9000 servers, shows the operation status of the IP packet filter-

showpacketfilters(8)

System Administration 457