Oracle Sun SPARC Enterprise M3000 Reference Manual page 206

setdomainmode(8)
EXIT STATUS
SEE ALSO
192 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009
Cancels the setdomainmode(8) command execution that is in progress.
EXAMPLE 3
setdomainmode -d 0 -m diag=none
XSCF>
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
n
Continue? [y|n]:
Enables the auto boot function for domain ID 0. Suppresses prompts, and au-
EXAMPLE 4
tomatically answers "y" to all prompts
setdomainmode -q -y -d 0 -m autoboot=on
XSCF>
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
showdomainmode(8), showdomainstatus(8)
:min -> none
:on -> -
:on -> -
:auto -> -