Table of Contents
Advertisement
NAME
showcodactivation - display the current Capacity on Demand (COD) activation
permits stored in the COD Hardware Activation database
SYNOPSIS
showcodactivation [-r] [-v]
showcodactivation -h
DESCRIPTION
showcodactivation(8) displays information stored in the COD Hardware
Activation database.
This command is not available on the M3000 server.
When used without options this command displays the current COD hardware
activation keys (COD keys).
Note – For details on COD keys, refer to the SPARC Enterprise M4000/M5000/
M8000/M9000 Servers Capacity on Demand (COD) User's Guide.
You must have platadm or platop privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
The following options are supported:
OPTIONS
-h
-r
-v
EXTENDED
The showcodactivation(8) command displays the following information:
DESCRIPTION
Description
Ver
Expiration
Count
Status
Displays usage statement.
When used with other options or operands, an error occurs.
Displays COD permit information in the raw permit-signature
format, as stored in the COD database.
Specifies verbose output. Displays both the formatted COD permit
information and raw permit-signature data.
Type of resource (processor).
Version number of the permit, which is always set to 01.
Expiration of the permit.
Number of permits granted for the given resource.
GOOD, which indicates that the given resource is valid, or
EXPIRED, which indicates that the resource permit is no longer
valid.
showcodactivation(8)
System Administration
341
Advertisement
Table of Contents
