Oracle Sun SPARC Enterprise M3000 Reference Manual page 394

showdomainstatus(8)
OPTIONS
EXAMPLES
EXIT STATUS
SEE ALSO
376 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Can run this command for all domains.
domainadm, domainmgr, domainop
Can run this command only for your accessible domains.
Refer to setprivileges(8) for more information.
The following options are supported.
Displays status information on all domains that can be accessed.
-a
-d domain_id Specifies only one ID of the domain to be displayed. domain_id
can be 0–23 depending on the system configuration.
Displays usage statement. When used with other options or
-h
operands, an error occurs.
Displays status information on all domains.
EXAMPLE 1
showdomainstatus -a
XSCF>
DID Domain Status
00 Running
01 Running (Waiting for OS Shutdown)
02 Powered Off
03 Panic State
04 Shutdown Started
05 Booting/OpenBoot PROM prompt
06 Initialization Phase
07 OpenBoot Execution Completed
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
poweroff(8), poweron(8), reset(8), showdcl(8)