Oracle Sun SPARC Enterprise M3000 Reference Manual page 165

OPERANDS The following operands are supported:
enable|disable
loadcert
rmcert
group administrator
group operator
group custom
userdomain
When used with no other operands, enable or disable the
Active Directory feature.
loadcert console prompts for certificate information
to be entered at the console. Use this command to paste
certificate information copied from a file. Terminate input
with CTRL-D.
loadcert URI loads a certificate file for the Active
Directory server. Supported formats for URI are:
http://server[:port]/path/file
https://server[:port]/path/file
ftp://server[:port]/path/file
file:///media/usb_msd/path/file
Delete certificate file for the Active Directory server.
strictcertmode must be in the disabled state for a
certificate to be removed.
Assign group name for up to five specified administrator
groups. The administrator group has platadm, useradm,
and auditadm privileges and you cannot change that.
Assign group name for up to five specified operator
groups. The operator group has platop and auditop
privileges and you cannot change that.
Assign group name and privileges for up to five groups.
Configure the specified user domain. A user domain can
be configured explicitly through the
command on XSCF, or entered at the login prompt using
the form, user@domain.
If a user domain is specified at the login prompt – for
■
example, login:
ima.admin@dc01.example.com
that user domain is used for this login attempt. Any
pre-configured user domains (as displayed by
) are ignored.
userdomain
If a user domain is not specified at the login prompt –
■
for example, login:
the pre-configured user domains, in turn, to
authenticate the user.
See EXAMPLE 6, below, for important information.
setad userdomain
– XSCF checks each of
ima.admin
System Administration
setad(8)
–
showad
151