Showssh - Oracle Sun SPARC Enterprise M3000 Reference Manual

NAME showssh - display the settings of the Secure Shell (SSH) service that configured for
the XSCF network
SYNOPSIS showssh [-c hostkey] [-M]
showssh -c pubkey [-u user_name] [-M]
showssh -h
showssh(8) command displays the current settings of the SSH service that
DESCRIPTION
configured for the XSCF network.
The following information is displayed:
SSH status
SSH DSCP
RSA key
DSA key
Fingerprint
When specified the display of user public key, the user public key number, which
automatically numbered by system, and the user public key are displayed.
Only SSH2 is supported for XSCF.
You must have one of the following privileges to run this command:
Privileges
■
■
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-c hostkey
-c pubkey
Validity of the SSH service
Whether the access from domain to the SSH service via the
Domain - SP Communication Protocol (DSCP) is permitted
Host public key in RSA format
Host public key in DSA format
Host public key in fingerprint format
To display the user public key of other user account:
useradm
To display the information other than above:
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Displays a host public key. If the -c option is omitted, "-c
hostkey" is assumed specified.
Displays the user public key. If the -c option is omitted, "-c
hostkey" is assumed specified

showssh(8)

System Administration 481