Oracle Sun SPARC Enterprise M3000 Reference Manual page 259

To reflect information on the specified network interface, execute the
■
applynetwork(8) command and reset XSCF.
EXAMPLES
EXAMPLE 1
XSCF>
EXAMPLE 2
XSCF>
EXAMPLE 3
XSCF>
EXAMPLE 4
XSCF>
EXAMPLE 5
XSCF>
EXAMPLE 6
XSCF>
EXAMPLE 7
XSCF>
You specified '-r' interface remove option.
So, we delete routing information that interface corresponds.
Continue? [y|n] :y
If you choose 'y'es, you must execute 'applynetwork' command for
application.
Or you choose 'y'es, but you don't want to apply, you execute 'rebootxscf'
for reboot.
Sets the IP address 192.168.10.10 and netmask 255.255.255.0 for XSCF-LAN#0
on XSCF unit 0.
setnetwork xscf#0-lan#0 -m 255.255.255.0 192.168.10.10
Sets the IP address 192.168.10.10 and netmask 255.255.255.0 for XSCF-LAN#0
on XSCF unit 0 in an M3000/M4000/M5000 server.
setnetwork lan#0 -m 255.255.255.0 192.168.10.10
Disables XSCF-LAN#1 on XSCF unit 0.
setnetwork xscf#0-lan#1 -c down
Sets the IP address 192.168.10.128 on ISN on the XSCF unit 0. By default,
255.255.255.0 is set for the netmask.
setnetwork xscf#0-if 192.168.10.128
Sets the IP address 192.168.11.10 and netmask 255.255.255.0 for XSCF-LAN#0
on XSCF unit 1.
setnetwork xscf#1-lan#0 -m 255.255.255.0 192.168.11.10
Sets the IP address 192.168.1.10 and netmask 255.255.255.0 for the takeover IP
address of XSCF-LAN#0.
setnetwork lan#0 -m 255.255.255.0 192.168.1.10
Removes the IP address and netmask that set in XSCF-LAN#0 on XSCF unit 0
setnetwork -r xscf#0-lan#0
setnetwork(8)
System Administration 245