Setlocale - Oracle Sun SPARC Enterprise M3000 Reference Manual

NAME setlocale - set the default locale of the XSCF
SYNOPSIS setlocale -s locale
setlocale -h
DESCRIPTION The setlocale(8) command sets the default locale of the XSCF.
The locale that can be set is English or Japanese.
You must have platadm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h
-s locale
EXTENDED
■
DESCRIPTION
■
EXAMPLES
EXAMPLE 1
EXAMPLE 2
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO showlocale(8)
Displays usage statement. When used with other options or
operands, an error occurs.
Specifies the default locale of the XSCF. Either of the following
can be specified for locale:
C
ja_JP.UTF-8
The specified locale becomes effective after the subsequent login.
The currently set locale can be checked by using the showlocale(8) command.
Sets the XSCF default locale for English.
setlocale -s C
XSCF>
C
Sets the XSCF default locale for Japanese.
setlocale -s ja_JP.UTF-8
XSCF>
ja_JP.UTF-8
Successful completion.
An error occurred.
Sets the locale for English.
Sets the locale for Japanese.
System Administration

setlocale(8)

229