Setpacketfilters - Oracle Sun SPARC Enterprise M3000 Reference Manual

setpacketfilters(8)

NAME setpacketfilters - set the IP packet filtering rules to be used in the XSCF network
SYNOPSIS setpacketfilters [ [-q] -{y|n}] -c {add | del} [-i interface] [-s address [ /mask]]
-j target
setpacketfilters [ [-q] -{y|n}] -c clear
setpacketfilters -h
The setpacketfilters(8) command sets the IP packet filtering rules to be used
DESCRIPTION
in the XSCF network.
IP packet filtering rules can be used to prevent illegal access to the XSCF network.
Settings specified with setpacketfilters(8) are applied immediately after the
command is executed.
You must have platadm or fieldeng privilege to run this command.
Privileges
Refer to setprivileges(8) for more information.
System Administration 251