Table of Contents
Advertisement
NAME
showenvironment - display the airflow volume, intake air temperature and
humidity, temperature sensor, voltage sensor, fan speed, and power consumption
information in the server
SYNOPSIS
showenvironment [-M] [ type]
showenvironment -h
DESCRIPTION
showenvironment(8) command displays the information listed below.
The following types of the information are displayed:
Exhaust air
information
Environment
information
Temperature
information
Voltage
information
Fan speed
information
Power
consumption
information
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, fieldeng
Refer to setprivileges(8) for more information.
Amount of exhaust air from the server
Display of exhaust air information is supported only on the
M3000/M8000/M9000 servers.
Intake temperature and humidity of the system
Humidity is supported only on the M8000/M9000 servers.
Intake temperature of the system and exhaust temperature of
each component
You can check the exhaust temperature of the following
components.
M3000 server
M4000/M5000 servers
M8000/M9000 servers
Voltage sensor value
Fan rotational state and revolutions per unit of time
Maximum and actual power consumption values
The power consumption information is supported only on the
M3000 server.
showenvironment(8)
motherboard unit(MBU_A), CPU
CPU module(CPUM), I/O
unit(IOU)
CPU/memory board unit(CMU),
CPU module(CPUM), crossbar
unit(XBU_B)
System Administration
385
Advertisement
Table of Contents
