Oracle Sun SPARC Enterprise M3000 Reference Manual page 38

applynetwork(8)
26 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
Applies the information that has been set for the XSCF network. Suppresses
EXAMPLE 3
prompts, and automatically answers "y" to all prompts.
applynetwork -q -y
XSCF>
Sets the name server and the search path and then applies the XSCF network
EXAMPLE 4
settings.
applynetwork
XSCF>
The following network settings will be applied:
xscf#0 hostname
DNS domain name
nameserver
nameserver
nameserver
search
search
search
search
search
interface
status
IP address
netmask
route
interface
status
IP address
netmask
:hostname-0
:example.com
:10.23.4.3
:10.24.144.3
:10.24.131.7
:example1.com
:example2.com
:example3.com
:example4.com
:example5.com
:xscf#0-lan#0
:up
:10.24.144.214
:255.255.255.0
:-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
:xscf#0-lan#1
:down
:
: