Table of Contents
Advertisement
nameserver
interface
status
IP address
netmask
route
interface
status
IP address
netmask
route
y
Continue? [y|n] :
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
On M8000/M9000 servers:
applynetwork
XSCF>
The following network settings will be applied:
xscf#0 hostname
xscf#1 hostname
DNS domain name
nameserver
interface
status
IP address
netmask
route
:10.23.4.3
:xscf#0-lan#0
:up
:10.24.144.214
:255.255.255.0
:-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
:xscf#0-lan#1
:down
:
:
:
:hostname-0
:hostname-1
:example.com
:10.23.4.3
:xscf#0-lan#0
:up
:10.24.144.214
:255.255.255.0
: -n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
applynetwork(8)
System Administration
23
Advertisement
Table of Contents
