Table of Contents
Advertisement
TRENDnet User's Guide
LED Indicator
The green LED will be flash when power on the camera and if there is the data
transmission.
Power On
LED
Waterproofing
The camera is designed featuring waterproof. However, you need to protect the cable
connectors from water soaking. For example, you can tape the junction points of the
connectors while you connect the cables or purchase a weatherproof cable/power cord
protector.
SD Card Slot
After installed a Micro SD Card, please ensure the cover was screw tightly to protect
water soaking.
© Copyright 2014 TRENDnet. All Rights Reserved.
Camera Installation
1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the
Auto-Run program. Click the Install Camera.
2. Write down the MAC ID of the camera.
TV-IP343PI
4
Advertisement
Table of Contents
