Turning Corners - ELNA 745 User Manual

Turning Corners

Sew to the turning point and stop with needles
up. Hand turn the flywheel towards you to
bring needles to the lowest position into the
fabric. Carefully reverse the flywheel bringing
needles to the highest position. (This releases
the needle threads off the looper.) Raise the
presser foot, turn the fabric, lower the needles
into the fabric, lower the presser foot and
continue sewing.
The looper thread will drop at the corner. Use
a hand needle and thread to prevent the loop
from unraveling. Pull the diagonal thread to
corner (a).
Turn fabric over and secure loop to corner on
the underside.
100