Maintenance; Cleaning And Oiling - ELNA 745 User Manual

SECTION VII

Maintenance

Proper machine cleaning and oiling are
essential to ensure maximum machine
performance.

Cleaning and Oiling

Unplug the machine from the electrical outlet.
Open the front and side covers.
Remove the presser foot by pushing the lever
behind the needle bar.
Remove the needle plate by pushing down its
release lever (a).
Disengage the movable cutting blade.
Use the brush to remove all lint and fiber
accumulation.
Place a drop of oil above and below the oiling
arrows. Oiling should be performed for every
8 hours of actual sewing operation.
Reattach the needle plate by pressing down
on its front section until it snaps onto the
needle plate screw (b).
To reattach the presser foot, place the foot
underneath the presser foot area and lower
the needle bar. The foot will snap back into
place.
104