Table of Contents
Advertisement
2.2 Network Connection and IP assignment
The Network Camera supports the operation through the network. When a camera is first connected
to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the
"Smart Manager" utility on the CD.
1.
Connect the Network Camera / device to the network and power up.
2.
Start SmartManager utility ( All programs > NautilusClient16 > SmartManager), the main window
will be displayed, after a short while any network devices connected to the network will be
displayed in the list.
3.
Select the camera on the list and click right button of the mouse. You can see the pop-up menu
as below.
4.
Select Assign IP. You cam see a Assign IP window. Enter the required IP address.
HDB-T3x0 Series, Quick Installation Guide
Note: For more information, refer to the Smart Manger User's Manual.
4
Advertisement
Table of Contents
