Connecting The Projector With The Power Net - Barco RLM-W14 User Manual

3.Physical Installation
• Moving the lens horizontally
The distance of horizontal lens movement is 30% of half the screen width in both directions. For instance, if you are using
a 80" × 50" screen, you will be able to move the image left or right by no more than 12".
This illustration shows normal horizontal lens shift without the use of special specification lens or projector.

3.3 Connecting the projector with the power net

C
1. Ensure that the power switch stands in the '0' (OFF) position (1).
2. Tear off the warning label (2)
3. Connect the female side of the power cord with the power input socket of the projector (3).
4. Secure the power plug by locking the plug holder clamp (4).

5. Connect the male side of the power cord to the local power net.
18
AUTION: Use only the power cord provided with the projector.
Connect to Wall plug
VOIR LA NOTICE D'INSTALLATION
AVANT DE RACCORDER AU RÉSEAU



RLM W14 08/20/2014