Barco RLM-W14 User Manual page 24

3.Physical Installation
2. Follow below image to install the lens.
How to remove the lens
1. Follow the drawing to press the button
2. Press down the lever to release the lens
3. Pull out the lens.
Make sure to hold the lens lever fully when install the lens (or remove the lens)
C
before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
It's recommended to place the Lens caps of the original Lens packaging, back on both sides of the
removed Lens to protect the optics of the Lens.
Lens focus
Press the button
buttons to adjust the lens' focus (clarity).
16
Carefully align the connectors
while installing the lens.
Don't forget to attach the
hook at the lensholder

AUTION: Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens
on the remote control or MENU on the projector panel, Choose OSD -> LENS FOCUS , then use the

—>
Click

RLM W14 08/20/2014