Barco RLM-W14 User Manual page 32

4. Input & Communication
4. IR EXT.
Receives input signal from compatible Niles or Xantech IR repeater systems.
5. YUV1
Standard and high definition (480i/480p/576i/576p/720p/1080i/1080p) component input, connects to DVD/HD-DVD/BD
player, HD set-top-box or other SD/HD input source.Also connects to RGB input from RGBS input source.
6. 10/100 BASE-T
Ethernet port
The projector can be connected to a LAN (local area network) using the Ethernet port on the communication interface. Once
connected to the LAN, users are capable of accessing the projector from any location, inside or outside (if allowed) their
company network using the control software: Projector Toolset. This toolset locates the projector on the network in case
there is a DHCP server or the user can insert the correct IP-address of the projector to access the projector. Once accessed,
it is possible to check and manipulate all the projector settings. Remote diagnostics, control and monitoring of the projector
can then become a daily and very simple operation. The network connectivity permits to detect potential errors and
consequently improve the time to servicing.
The connector used for the Ethernet ports (E) are of rugged Neutrik EtherCon RJ45 type, which is compatible
with standard RJ45 cable connector. Straight (most common) as well as cross linked network cables can be
used.
10/100 BASE-T - RJ45 port
PIN Description
1 TXD+
2 TXD-
3 RXD+
4 -
5 -
6 RXD-
7 -
8 -
SYNC IN ,OUT
7.
The 3D Sync in signal is generated from the 3D source to make sure the left/right eye content is synchronized to the user and
the projector.
8. SDI/HDSD/3G
Serial digital interface. use BNC connects input or output the image.
9. HDMI
HDCP compatible digital image input; connects to sources using HDMI or DVI.
10.VGA
Standard 15-pin VGA connection socket to connect to RGB, high-definition component input or PC. The projector will
automatically detect the resolution of the input signal.
11. RGBHV/YUV2
Optional multi purpose input which can be inserted in the free slots.
Input Signal
RGBHV
Composite Video
12. Stereo DVI
Use this DVI dual link to connec to a stereo 3D source - it is usually a computer with 3D Graphics card and 3D applicatoins.
24
RS232 input (Sub-D) port
G/Y B/Pb
G B
Y Pb
R/Pr H
R H
Pr -
V
V
-
RLM W14 08/20/2014