Projector Configurations - Barco RLM-W14 User Manual

2.General
Mechanical check
This check should confirm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents
and scratches, and that the operating panel is not scratched or cracked. The Barco Sales and Service office should be notified
as soon as possible if this is not the case.

2.4 Projector configurations

The different configurations
Depending on the installation the projector can be mounted in different ways, the different configurations are:
1. Front / Table (F/T)
2. Front / Ceiling (F/C) (upside down)
3. Front / Ceiling (F/C) (table position)
4. Rear / Table (R/T)
5. Rear / Ceiling (R/C) (upside down)
6. Rear / Ceiling (R/C) (table position)
Front projection
The projector is installed, either in a table mount or ceiling mount configuration, at the same side of the screen as the
audience.
F/C
F/T
Front projection
Rear projection
The projector is installed, either in a table mount or ceiling mount configuration, at the other side of the screen opposite the
audience.
8
AUDIENCE
FLOOR
AUDIENCE
FLOOR
Rear projection
AUDIENCE
FLOOR
Rear projection, ceiling mounted in table position
AUDIENCE
F/C
Frontprojection,Ceilingmounted,intableposition
BACKSTAGE
R/C
R/T
BACKSTAGE
R/C
FLOOR
RLM W14 08/20/2014