IR INPUT connection
If the projector is unable to pick up the IR signals from the remote controle due to distance or obstacles (i.e. wall or cabinet
doors), you can connect an external IR repeater to the projector's IR INPUT jack to extend the effective signal reception range.
COMPONENT connection
Take the 3/5 cabled RGB component video connectors from the source equipment to the projector's COMPONENT1 SCART or
COMPONENT2 jacks.
RLM W14 08/20/2014
200mA
200mA
IR sensor
Remote control
IR repeater
Y
Pb
Pr
DTV
DTV set-top-box or other compo-
(YPbPr)
nent (YPbPr) input source
4. Input & Communication
29