Upgrade Kit With Power Adapter Plate For Routers And Concentrators - Cisco Power system Installation Manual

Upgrade Kit with Power Adapter Plate for Routers and Concentrators

Upgrade Kit with Power Adapter Plate for Routers
and Concentrators
Note
Cisco Redundant Power System Hardware Installation Guide
3-6
External devices operated with the Cisco RPS must have a Cisco RPS connector.
Cisco 2600 series routers, Cisco 3620, Cisco 3640, and Cisco 3725 routers, and
Cisco 4000 series routers, and the Cisco MC3810 concentrator do not
automatically ship with an RPS connector.
The FastHub 400 series hubs, Cisco 1516M hub (HP 10ASE-T Hub-16M),
Catalyst 1900 series and Catalyst 2820 switches, and Catalyst 2900 series and
Catalyst 3500 series XL switches ship with an RPS connector and do not require
a power adapter plate.
If you did not order your router or concentrator with a Cisco RPS connector
installed, you must order a power adapter plate that provides compatibility and
must install the plate in place of your existing power supply.
If you need to order a power adapter plate for your router or concentrator, see
Table 3-2, which lists adapter plates and corresponding product order numbers.
Contact Cisco Customer Service at 800 553-6387, 408 526-7208, or
cs-rep@cisco.com for ordering information. (See also the
Documentation" section on page
Table 3-2 Power Adapter Plate Product Numbers
Description
Cisco 2500 series, Cisco MC3810 adapter plate
Cisco 2600 series adapter plate
Cisco 3620 adapter plate
Cisco 3640 adapter plate
Cisco 3725 adapter plate
Cisco 4000 series adapter plate
Device-specific instructions for installing the RPS adapter plate are shipped with
the plate and are also available on Cisco.com at http://www.cisco.com.
Chapter 3
xviii.)
Connection Requirements
"Obtaining
Product Number
ACS-2500RPS=
ACS-2600RPS=
ACS-3620RPS=
ACS-3640RPS=
??
ACS-4000RPS=
OL-3654-01