Safety Warnings; Safety With Electricity - Cisco Power system Installation Manual

Safety Recommendations

Safety Warnings

Safety with Electricity

Warning
Warning
Warning
Cisco Redundant Power System Hardware Installation Guide
1-12
Wear safety glasses when working under conditions that might be hazardous
•
to your eyes.
Do not perform any action that creates a hazard to people or makes the
•
equipment unsafe.
Safety warnings appear throughout this guide in procedures that, if performed
incorrectly, might harm you. A warning symbol precedes each warning statement.
(For information on safety warnings and translations, see the
and Warnings" section on page
Read the installation instructions before you connect the system to its power
source. To see translations of the warnings that appear in this publication, refer
to the Regulatory Compliance and Safety Information document that
accompanied this device.
The device is designed to work with TN power systems. To see translations of
the warnings that appear in this publication, refer to the Regulatory Compliance
and Safety Information document that accompanied this device.
Before working on equipment that is connected to power lines, remove jewelry
(including rings, necklaces, and watches). Metal objects will heat up when
connected to power and ground and can cause serious burns or weld the metal
object to the terminals. To see translations of the warnings that appear in this
publication, refer to the Regulatory Compliance and Safety Information
document that accompanied this device.
xi.)
Chapter 1 Overview
"Notes, Cautions,
OL-3654-01