Tools And Equipment Required; Identifying Rack-Mount Brackets - Cisco Power system Installation Manual

Chapter 2 Installing the Cisco RPS

Tools and Equipment Required

Identifying Rack-Mount Brackets

OL-3654-01
You need the following tools and equipment to rack-mount the Cisco RPS:
Number 2 Phillips screwdriver (not included)
•
Screws for attaching the Cisco RPS to the rack (not included)
•
Rack-mount brackets (see
•
One set of 19-inch brackets (ACS-3640RM-19=) ships with the
–
Cisco RPS.
Order 23- or 24-inch brackets (ACS-3640RM-24=), as needed.
–
Order telco brackets (AS52/3RM-TELCO-19=), as needed.
–
Figure 2-1 shows the 19-, 23-, and 24-inch brackets;
bracket.
Figure 2-1 19-, 23-, and 24-Inch Rack-Mount Brackets
Bracket for 19-inch rack
Cisco Redundant Power System Hardware Installation Guide
Figure 2-1 and Figure
Use with 23-inch rack
Use with 24-inch rack
Bracket for 23- and 24-inch rack
Rack-Mounting the Cisco RPS
2-2):
Figure 2-2 shows the telco
2-5