7 • Maintenance
7. You have a choice of 4 purges to use. Normally selecting
"Purge A" is sufficient to purge the system, unless directed by a
representative of your machine supplier to do otherwise.
8. The system executes a purge. This may take a few moments.
When finished, you return to the Purge screen.
9. Press Clear (back arrow key) 5 times to return to the Home
screen.
OR
Press Clear (back arrow key) to return to the Printer
Maintenance screen and perform a Test Print as described on
page 7-10 to check that the purge has worked.
Replacement (of Printhead or Cartridge)
This option steps you through the procedure to replace either the
printhead or ink tank (cartridge).
NOTE: See "Replacing the Ink Cartridge/Printhead" at the
beginning of this chapter which explains this procedure in
detail using illustrations.
1. Press Options.
2. Press Page Down twice.
3. Select "Advanced Features".
4. Select "Maintenance mode".
5. Select "Printer maintenance".
6. Select "Replacement".
7. You have a choice to replace the printhead or ink tank (cartridge).
8. Follow the steps in "Replacing the Ink Cartridge/Printhead" at the
beginning of this chapter.
7-12
SDC570F