Swift Motorhome Owners Service Manual page 107

T R U M A C OMB I CO N TROL
Heater
Settable temperature range 5 - 30 °C
(1 °C steps)
a = heater * – Heater is switched on.
Air conditioning unit (not normally fitted)
Settable temperature range 16 - 31 °C (1 °C
steps)
b = cool *
( Air conditioning unit is switched on)
c = auto
(Air conditioning unit is set to automatic)
d = hot
(Air conditioning unit is in heating mod.)
* This symbol will flash until the required room
temperature is reached.
Change the warm water level
• Use the control knob / push button to select
the symbol in menu line (3).
• Click to change to the setting level.
• Use the control knob / push button to select
the required level.
• Click the control knob / push button to
confirm the value.
a
2
3
a = Boiler *
(Warm water boiler is switched on)
b = 40°
(Warm water temperature 40 °C)
c = 60°
(Warm water temperature 60 °C)
106
d
c
b
d = boost *
(Targeted, fast heating of the content of the
boiler [boiler priority]. The water temperature
is kept at the higher level [around 62 °C] – Not
Combi Diesel. Once the water temperature is
reached, the room is heated again.)
* This symbol will flash until the required water
temperature is reached.
Select power type
• Use the control knob / push button to select
the symbol in menu line (3).
• Click to change to the setting level.
• Use the control knob / push button to select
the required power type.
• Click the control knob / push button to
confirm the value.
a
2
3
Symbol Operating mode
a Gas
b EL 1
b + c EL 2
a + b Mix 1*
a + b + c Mix 2*
* Mixed mode
Special aspects in the mixed mode
Interruption of the power supply 230 V
b
c
Power type
Gas
Electro
Electro
Gas + Electro
Gas + Electro