Swift Motorhome Owners Service Manual page 142

RM 8xx1 models MES appliances
(manual energy selection)
Electrical operation
1
2
To start the refrigerator, press button (1) for 2
seconds.
The refrigerator starts with the last selected
type of energy.
230V operation :
Press button (2) :
12V operation :
Press button (4) :
Gas operation
Gas operation :
Press button (3) :
The ignition process is activated automatically
by means of an automatic igniter.
Note: The flame extinguishes after
reaching the preset cooling compartment
temperature and ignites again if the cooling
compartment temperature increases again.
If the flame is not lit after the first ignition
attempt, the automatic igniter repeats the
ignition twice (duration 30 s) at time intervals
of 2 minutes. If the flame is not lit afterwards,
a fault is indicated.
3 4
Fig. 16
3
Fig. 17
Setting of cooling compartment tempera-
ture
6
Select the desired cooling compartment
temperature by pressing button (6) .
The LED display (7) of the selected
temperature setting is illuminated.
The scale starts with MIN position at the left
LED position (small bar = highest temperature)
and climbs up to MAX position at the right LED
position (large bar = lowest temperature).
Note: The temperature levels do not relate
to absolute temperature values.
RM 8xx5 models
Manual operation
1
2
To start the refrigerator, press button (1) for 2
seconds.
The refrigerator starts with the last selected
type of energy.
230V operation :
Press button (2) :
12V operation :
Press button (4) :
Gas operation :
Press button (3) :
7
Fig. 18
3 4
Abb. 19
141